Altitude / Oxygen concentration: from 0 ft (21% oxygen ) to 34,000 ft (4.4% oxygen)

Incremental adjustment of altitude: 1 foot

Maximum assent or desent rate: 1,000 feet per second

Minimum assent or desent rate: 1 foot per minute

Breathing mask connector: MS 22058-1

Dimensions:

Height : 12.” (30.48 cm)
Width: 17.5” (44.450 cm)
Length: 23.5” (59.69 cm)

Weight: 55 lbs (20.4 kg)

Electrical Requirements:

Standard: 00 VAC to 250 VAC, (50/60 Hz)
Power consumption: 2 amps @ 110 VAC

Performance Temperatures:
15o C to 35o C

Storage Temperature Range
-10o C to 50o C

Environics is a registered trademark of Environics Inc. Other trade names or brand names are the property of their respective holders. We hope the information given here will be helpful. It is based on data and knowledge considered to be true and accurate and is offered for the users' consideration, investigation and verification, but we do not warrant the results to be obtained. All specifications and descriptions contained herein are subject to change without notice. Please read all statements, recommendations or suggestions in conjunction with our conditions of sale which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use which would infringe any patent or copyright.

 

69 Industrial Park Road East, Tolland, CT 06084
(860) 872-1111 Fax: (860) 870-9333
World Wide Web: http://www.environics.com
E-mail: info@environics.com
Copyright 1995 Environics Inc. Printed in USA 11/05

SPECIFICATIONS:

Power Input: 10VAC to 220 VAC; EMI / RFI protected

Gas input: Input ports are color coded
and keyed as follows:

Nitrogen is blue
Air is white
Oxygen is green

Pressure: Nitrogen and air 40 psig
Oxygen 15 – 20 psig

Communications: RS232

Capacity: One Subject Under Test (SUT)
at a time.

Oxygen Dump: 100% oxygen dump switch to be actived by the operator.

Pulse oximeter: Built in pulse oximeter
displays both pulse and SpO2 with user selectable alarm settings.

Pulse oximeter probe: Can be used with a finger tip probe or a Y sensor with ear clips.

Output range: User programable for altitude / oxygen concentration and duration at each step.